Characteristics Of Glass Wool Panels
- Fireproof
Glass wool as core material is fireproof and can stand high temperature up to 1000ºC. And in case
of fire, glass wool can effectively prevent fire from spreading.
- Waterproof
Good sealing and high-density material keep water from being leaked.
- Heat Preservation
The heat conductivity index can be as low as 0.043w/m·k. And with precise design,glass wool panels
can assure good sealing and heat preservation.
-Noise Reduction
The noise reduction capacity of glass wool wall panels is >=37dB(50mm),which makes the inner environment
from being affected by outside noise.
- Long Service Life
The life expectancy of glass wool panels can be as old as the building of its high-quality materials under
normal usage and maintenance.
|
Thickness: |
50mm, 75mm, 100mm, 150mm |
|
Material of the panels |
Glss wool sandwich panels |
|
Unit Weight of Core Material |
8-20 kg/cbm |
|
Width of the panels |
950/1150mm |
|
Panels type |
Wall panel and Roof panel |
|
Heat Insulating Material |
Polyurethane (pu), glass wool |
|
Thickness of steel sheet |
0.4-0.7mm |
|
Color of the coating |
White grey, Sea Blue, Red, etc |
|
Type of sheet Coating |
PVDF, HDP, SMP, PE |
|
Type of Base steel sheet |
Hot-dip galvanized, Al-Zn coated |
→Hydraulic uncoiler:
Our new uncoiler is with automation level and can uncoil 8 ~ 10 tons steel coils at one time.In this way,it
can improve product output rate,and reduce the material wastage.And it can save cost,when it's big order.
→Film mulching & panel cutting:
Our PVC films required no less than 5C.When it's special material,we can use high strength and high mucosa
films to protect the surface coating.
RCH-I:By making high frequency sparks to break the bottom side of color steel,which can help improve the
panel strength,when steel sheets are attaching to core material.
→Forming equipment:
Nine channels deviation correction device is to make sure internal and external sheets can be with zero error.
At the same time,it can make sure the joint be tight.
→Preheating equipment:
Preheating equipment is to make preheating for steel sheets.According to the research,when it's under 30 ~ 40 ºC,the steel sheets adhesiveness is the best.
→Fully automatic cotton renewal device:
When it's rockwool or glass wool panels cutting,it can be cut and turned over 90°when bonding.This is not
only improving the panel strength,but also increasing the adhesiveness between steel sheets and insulation layer.The speed is 6m / minutes.
→6 or 7-component polyurethane on-line foaming:
The utility model is composed of a material tank,a material distributing rod and a temperature control part.We
have 6-component polyurethane on-line foaming and 7-component polyurethane on-line foaming technology.
→On-line polyurethane foaming:
The second main part of our equipment is the errors of flatness and machining accuracy are within 0.10mm.Basically it can be zero error.And the temperature control of the whole double track is particularly accurate.26m super long double tracks can make sure the panel cutting time enough,and keep panel in
stable performance and good quality.
→Automatic cutting machine:
We have two kinds of cutting process,one is circular saw,which can make sure cutting accuracy greatly.The
other one is band saw,which is mainly used for panels with stainless steel sheets or panel thickness is over
150mm.
Yumi steel is always doing our best to offer reassuring product for every customer.For information,
please contact our sales team for more.
Panel application
The glass wool wall sandwich panels can be used for fresh-keeping storage room,industrial plants,
prefab houses,container houses,steel warehouses,steel buildings,clean room,etc.
FAQ:
Q1. Are you a factory or a trading company?
We are professional factory with ISO,CE standard,OEM service is welcome.
Q2. What's your delivery time?
Salesman will confirm the time accordingly, large order should communicate with order management department in advance. Normally,
delivery time is 5-15 days after receive deposit. Large order delivery time should be arranged separately.
Q3. How to control the quality of your product?
a) Quality of the design: think about possible problems in advance and provide a high quality design solution.
b) Quality of the raw material: choose the qualified raw material
c) Quality of the production: precise manufacturing technique, experienced workers, strict quality inspection.
Q4.what is the length can you offer?
20'GP or 40'HQ. So in order to take good advantage of container space,
we suggest the length no more than 11.8 M.
Q5.How long time your paint will last?
The durable time will be different in different zinc, paint coating. Also different environment has
different effect on the durable time.
Q6.What is PE coating?
PE is most widely-used painting in the color coated steel coils. It is characterized
by good overall performance, and high economic as well.
Q7: Can you provide us with design services?
A: Yes, we can design a complete solution drawing according to your requirements.
We will be glad to establish sincere business cooperation with you in the near future.
Q8: Do you provide guidance services for overseas site installation?
A: Yes. . We will provide detailed installation drawings and videos free of charge.
Q9: How can I get your quick quotation for my project?
A: The more detailed your description, the faster our quotation will be. You can chat with us by
email or telephone at any time and provide us with your detailed information, or you can leave
a message on our website. We will provide you with the best quotation as soon as possible.
Thank you for your cooperation.
Q10: What is the trading procedure?
Answer: Design drawings → Confirm drawings → Quotation →PI→ Confirm PI→ Arrange 30%
deposit → Manufacture →QC inspection → Pay the balance → Freight. Q5: What is the biggest
advantage of your product? A: The quality of our products is superior to that of other manufacturers.
We use high-quality raw materials and strictly control the quality of production. We improve the
product performance by improving the technology. These make our products more beautiful,
longer in service life and lower in use cost.
){kind=link}