Galvanized Metal Corrugated / Steel Corrugated Galvanized Iron Roofing Sheet

• Customization: Available
• Hardness: Full Hard
• Standard: ASTM, GB
• Model NO.: N/A
• Surface Treatment: Customized, Galvanized
• Effective Width(mm): 840
• Wave Height(mm): 26
• Wave Distance(mm): 210
• Steel Sheets Thickness(mm): 0.18-1.5
• Length: Max 5.8m for 20gp;11.8m for 40gp/Hq
• Coating Type: PE/PVDF/SMP/PVC, etc
• Color: as Ral or Customized
• Zinc Coating(G/M2): 30-275
• Transport Package: Seaworthy Packing Standard/as Customer′s Request
• Specification: As per order QTY
• Trademark: HXY
• Origin: Xiamen, China
• HS Code: 72104900
• Production Capacity: 100, 000 Square Meter Per Month

Product Description

 

 

Product Description

What are corrugated sheets used for?
 

A corrugated panel has a repeating wavy or rippled pattern across its design. It was the first mass-produced metal panel design in the United States. 
Corrugated metal galvanized roofing sheets,actually it is colorful steel pre-painted sheet,which is rolled and cold bended into different profiled boards.A wide range of our company's commercial products and design options will allow you and your team to meet or surpass design objectives and building codes and standards for architect-designed buildings including: schools, hospitals, apartment complexes, hotels, government buildings, offices, civic centers, stadiums, arenas, museums, churches, shopping complexes, transit facilities, warehouses and more.

 

Product Advantages:

Advantages for metal corrugated colored sheet:
☆ Bright colors: colorful steel tile played a very good decorative effect. Has a strong visual effect.
☆  Light weight: a combination of a variety of steel and single-color plate made of steel tile plant bearing capacity is good, but the light of its own weight.
☆ Low cost: Compared steel sandwich panel plant cost savings of 5-14 dollars per square meter.
☆ Seismic capability: steel has good stiffness and strength and toughness, resistance to seismic level of 6 degrees
☆ Span: to meet the various needs of industrial production.



 

Product Parameters

Standard:	ASTM,DIN, GB,SGS,ISO,etc.
Steel Thickness:	Wall:0.3~0.8mm,Roof:0.18-1.5mm
Effected Width:	600~1050mm
Length:	Max 5.8m for 20GP;Max 11.8m for 40GP/HQ
Substrate steel:	Galvanized/ Galvalume Steel Sheet
Coating:	Z60~Z275 g/M2 AZ60~AZ100g/M2
Color:
Color:	Choose from RAL Code or Customized
Paint Types:	PE/SMP/HDP/PVDF
Paint Thickness:	Top Side:14-25um Back:5-10um

Model types base:

Installation Instructions

How to install the sheet metal roofing?
1.)Attach the roofer's harness to a secure point as directed by the manufacturer. Wear your safety goggles to protect your eyes from stray and other debris.
2.)Inspect the roof decking or rafters to make sure there are no screws, nails or other protrusion that might cause damage to the insulation. If there are, remove them. If there is any debris on the roof decking, sweep it off before starting.
3.)Unroll the insulation, starting at one corner of the building, vapor barrier side down. The first area to be insulated is the section of roof along the eaves, so that each subsequent row toward the peak lies on top of the previous row. This helps minimizes the chance of moisture getting between the rows of insulation if the roof spring a leak.
4.)Nail the edge of the insulation securely to the roof, using galvanized roofing nails. Space the nails about a foot apart along the edge.
5.)Move to a position about 4 feet from the first row of nails. Pull the insulation tightly over the roof, but not so tightly that you tear it. Nail it securely at that point. You can adjust the distance slightly if you are close to a rafter, since it is better to nail directly into a rafter if you can. Repeat the process across the entire roof.
6.)Start the next row of insulation just above the first row, allowing a few inches of overlap. Follow the same procedure to attach this row of insulation, and do the same for each subsequent row until you reach the peak of the roof.
7.)Place roof closure strips along the eaves on both sides of your roof. These keep wind and rain out, keeping the temperature insistent and protecting the insulation. Make sure the strips you use match the design of your metal panels. Your roof is now insulated and ready for placement of the corrugated metal panels.
 

Product applications:

 

 

Company Profile

Service&Support:

Xiamen Yumi New Material Technology Co., Ltd. Is one combination of industry and trade company, and very professional with steel structure products in China. Because of good quality and service, competitive price, our products are sold worldwide, such as America, South America, Europe, Southeast Asia, Africa etc. 

1)Professional sales team,One-to-one service;
2)Combination of industry and trade company,to ensure the service and price;
3)Experienced engineer team to offer professional technology service;
4)Intimate after-sales service.

Experienced technology suport, competitive price, professional service, we are here to help you go on with your project smoothly.