100mm Waterproof Glass Wool Sandwich Steel Roofing Panel for Storage/Factory/Workshop

• Customization: Available
• Feature: Environmental, Fireproof, Light Weight, Metal Panel
• Fire Rating: 1
• Model NO.: 950/1150
• Certification: CCC, ISO9001
• Customized: Customized
• Model No.: 950/1150
• Steel Sheets Thickness(mm): 0.4-0.7mm
• Usage: for Wall and Roof Decoration of Steel Buildings
• Special Color: as Ral or Customized
• Zinc Coating(G/M2): 30-275
• Length: Max 5.8m for 20gp;11.8m for 40gp/Hq
• Core Thickness(mm): 50/75/100/150/200
• Grass Wool Density(Kg/M3): 8-20
• Transport Package: Seaworthy Packing Standard
• Specification: As per order QTY
• Trademark: Yumi
• Origin: Qingdao, China
• HS Code: 72104900
• Production Capacity: 100, 000 Square Meter Per Month

Product Description

75mm  A  Fireproof Glass Wool Sandwich Panel For Steel Buildings 

Characteristics Of Glass Wool Panels
- Fireproof
  Glass wool as core material is fireproof and can stand high temperature up to 1000ºC. And in case of fire, glass wool can effectively prevent  fire from spreading.

- Waterproof
  Good sealing and high-density material keep water from being leaked. 

- Heat Preservation
  The heat conductivity index can be as low as 0.043w/m·k. And with precise design,glass wool panels can assure good sealing and heat   preservation.

-Noise Reduction
The noise reduction capacity of glass wool wall panels is >=37dB(50mm),which makes the inner environment from being affected by outside     noise.

- Long Service Life
The life expectancy of glass wool panels can be as old as the building of  its high-quality materials under normal usage and maintenance. 

Panel application:

The glass wool wall sandwich panels can be used for fresh-keeping storage room,industrial plants,prefab houses,container houses,steel warehouses,steel buildings,clean room,etc. 





Specification:

Thickness:	50mm, 75mm, 100mm, 150mm
Material of the panels	Glss wool sandwich panels
Unit Weight of Core Material	8-20 kg/cbm
Width of the panels	950/1150mm
Panels type	Wall panel and Roof panel
Heat Insulating Material	Polyurethane (pu), glass wool
Thickness of steel sheet	0.4-0.7mm
Color of the coating	White grey, Sea Blue, Red, etc
Type of sheet Coating	PVDF, HDP, SMP, PE
Type of Base steel sheet	Hot-dip galvanized, Al-Zn coated

Panel production process:
→Hydraulic uncoiler:
Our new uncoiler is with automation level and can uncoil 8 ~ 10 tons steel coils at one time.In this way,it can improve product output rate,and reduce the material wastage.And it can save cost,when it's big order.

→Film mulching & panel cutting:
Our PVC films required no less than 5C.When it's special material,we can use high strength and high mucosa films to protect the surface coating.
RCH-I:By making high frequency sparks to break the bottom side of color steel,which can help improve the panel strength,when steel sheets are attaching to core material.

→Forming equipment:
Nine channels deviation correction device is to make sure internal and external sheets can be with zero error.At the same time,it can make sure the joint be tight.

→Preheating equipment:
Preheating equipment is to make preheating for steel sheets.According to the research,when it's under 30 ~ 40 ºC,the steel sheets adhesiveness is the best.

→Fully automatic cotton renewal device:
When it's rockwool or glass wool panels cutting,it can be cut and turned over 90°when bonding.This is not only improving the panel strength,but also increasing the adhesiveness between steel sheets and insulation layer.The speed is 6m / minutes.

→6 or 7-component polyurethane on-line foaming:
The utility model is composed of a material tank,a material distributing rod and a temperature control part.We have 6-component polyurethane on-line foaming and 7-component polyurethane on-line foaming technology.

→On-line polyurethane foaming:
The second main part of our equipment is the errors of flatness and machining accuracy are within 0.10mm.Basically it can be zero error.And the temperature control of the whole double track is particularly accurate.26m super long double tracks can make sure the panel cutting time enough,and keep panel in stable performance and good quality.

→Automatic cutting machine:
We have two kinds of cutting process,one is circular saw,which can make sure cutting accuracy greatly.The other one is band saw,which is mainly used for panels with stainless steel sheets or panel thickness is over 150mm.

Yumi steel is always doing our best to offer reassuring product for every customer.For information,please contact our sales team for more.